Rating Newest Oldest Best Answer: Now look on the back of the cable box. There should be multiple outputs – one of which is in use by your TV. For instance, on my deck, this is called “IN2. Hurrah, we’re almost done. You can now pop in a VHS tape and record. Remember – you cannot watch one channel, and record another – the signal is coming from the cable box, and it only has 1 tuner. If you wish to make a scheduled recording, set the VCR as normal – BUT instead of specifying the channel, specify the input where the cable box is connected! The VCR cannot control the cable box – it will only record whatever output is coming from the cable box at that time. Some cable boxes allow you to create “timers” which will tell the cable box to change the channel at a specific time.
Crocheted Denim Rag Bag
Take the cable from the wall goes to the input marked cable in on the box, the box you go hdmi out to the tv, and your done with that part. Now to access the cable box you need to press the input button on your tv’s remote control until you come to that input where the hdmi cable is in, they are usually labeled input 1,2,3 on the back of the tv and you can label them with your tv remote if you wish, so that takes care of the cable box to the tv.
For the dvd player you don’t say how have that hooked up, probably red, yellow, white cables. I will assume this as dvr recorders don’t usually have hdmi, but if yours does it pretty much the same. You should see the same colors on the outputs on the cables box. Then you go with outputs on the recorder to another input on the tv.
DCX Installation Manual. i IMPORTANT SAFETY INSTRUCTIONS • Read these instructions. • Keep these instructions. up systems to collect and recycle electrical and electronic waste items. Contact your local authorities for information about practices established.
Two VCRs video cassette recorders. A television or video monitor. Exactly what type of leads you’ll need will vary depending on the method you choose below. There are many variations on these simple systems and it can get a bit confusing for those who aren’t natural at this sort of thing. However once you get it connected you’ll find that it all follows a logical pattern. The connections and leads are fairly standard but your own equipment will obviously have some variations.
The same basic method of connecting this equipment applies to any type of VCR, from Betamax to broadcast formats. We’ll be connecting the two VCRs as shown in the diagram below. One VCR will become the “source” machine, the other will become the “record” machine. The tape you wish to copy or edit goes in the source machine, and the tape you wish to record onto goes in the record machine.
Before going further, decide which of your VCRs will be the source and which will be the record.
Satellite TV for your RV
A crocheted rag bag using recycled denim. It turned out to be a really heavy duty bag. But I think it turned out cool with the fibers kinda sticking out as they do.
View and Download Philips VRCAT hook-up instructions online. Hookup Pages. VRCAT VCR pdf manual download. If you have a Stereo TV, please see page After you hook up the VCR, go to page 11 to turn on the VCR. Disconnect the antenna or cable from your TV. Page 3.
So who wants to hook up my DVD player? It works when it feels like working. I have a new one well, it’s my mom’s but she doesn’t use it. My TV is about 5 years old weighs 70 pounds, and no, I’m not going to buy a new one. So I figure, how hard can this be? The floor behind my TV is a jungle of cables. All the cables run between the U-Verse box and the TV. How hard can this be? Of course nothing happens. I fool around and reach the end of my patience.
I reconnect the old DVD player and put the new one back in the box in the garage until I can find a 12 year old who can figure this out. Respond to this topic here on forum. Maybe I am glad I had 3 kids after all A connection with red yellow and white would be denoted as a “video input” in the tv’s source selection.
How can I hook up my VCR to my cable box
Here are the steps that exactly explains what you need to do. Read over your PC manual. The minimal requirements that you should have is 10 gigs hard drive space and at least Megs of RAM. However, are recommended for a faster transfer.
This port is used with the RF Converter box to hook the unit up via your cable/coaxial connection on the TV. METHOD #1 – RF Connection. What you will need: This is the method that most of you will remember. It was the staple method of hooking game systems up to a TV, starting with PONG and still used for the XBOX and Playstation 2.
May 29, If the back of your television looks anything like my inch Panasonic, the task may seem intimidating. You probably see a mind-numbing array of input ports that take various kinds of cables. On my own set, I have enough ports to hook up eight different electronic gizmos at the same time, including DVD players, satellite dishes and a computer. Never miss a local story. Sign up today for unlimited digital access to our website, apps, the digital newspaper and more.
Find or buy yourself an inexpensive set of RCA plugs with three connectors on each end. Generally, these connectors are yellow, red and white. They come in various lengths, so buy a set long enough to do the job without having several feet just dangling around. Insert the yellow plug into the video output, the red plug into the left audio output and the white plug into the right audio output.
On either the front or back of your TV, you should see a series of similar input ports.
LG RCT: Super
The wireless camera system is connected to my TV input, but I cannot see the camera picture? On some TV sets, the input can be found by first channel to channel 2, then down a channel once or twice to get to the correct input in which the wireless camera system is plugged to. Input 1, Input 2, etc. In the process of finding the right input, look for the camera picture to show on the TV output display.
X1 Dvr Coax • How To Activate A Cast Cable Box 14 Tep With • How Do I Connect My Gear Cable Modem Router Answer • How To Hook Up A Cast Cable Box 15 Tep With • Connecting A Receiver To Television • Rg59 Siamese Coax Cable Wiring Guide For Analog Cctv Camera Hd • Connecting A Cabletv Or Satellite System Audioholic • Winegard.
To skip ahead to the setup for your equipment, find the equipment you own in the table of contents below, and click on the link. Feel free to contact me if you spot an error in one or more of these wiring diagrams. Connecting a custom TiVo setup 1. With this setup you can record cable TV with the TiVo while you are watching another basic cable channel using the tuner in the TV. You switch between cable and the TiVo by using the “input select” button on your TV’s remote.
You switch between the Receiver and cable by using the “input select” button on your TV’s remote. This setup relies upon the ability of the TV to either automatically choose between S-Video and composite video on the same line input or having two line inputs. Remove the S-Video cable from the receiver to the TV. If a 3-way splitter causes too much signal loss, you may have to use a 2-way splitter.
If a 2-way splitter causes too much signal loss, you may have to connect cable to the VCR. This setup lacks flexibility, for example, you will be unable to watch the D-TiVo while the VCR is recording from cable. With this setup you can record satellite programs or cable with the TiVo and cable with the VCR while you are watching another cable channel using the tuner in the TV.
How To Hook Up a DVD Player
This needs to be done for both the video and for the audio. Some VCRs have one audio out socket mono and some have two audio out sockets stereo — we will look at stereo first, and look at the differences for mono later in this article. For non European VCRs, you will need a cable with these plugs at each end. These plugs are often called RCA or Phono plugs. The yellow cable is used for the video signal, the red cable for the right audio, and the white cable for the left audio signal.
Many VCRs come with these leads supplied.
Setup Codes Once you’ve found the codes for your devices, click here to see if they are in your specific remote. NOTE: If your remote uses 3 digit setup codes, just drop the leading zero, your remote won’t have codes greater than so don’t worry about those codes.
She still wants to record shows, the old time-shifting thing Swallowed My Cellphone , I don’t think I’ve ever seen a VCR like that. But it had the input for cable. Joey P , That’s the best I can think of. Earl Snake-Hips Tucker , You record on the VCR based on the signal from your antenna sounds like you don’t have cable or satellite.